· Automatic door non-contact pass / smart phone, smart key interlocking
· Automatic door control function
· Automatic door lock function
· Uses general sensor / control sensor selection
· Non_stop pass only for registered users
· Can be linked with existing door control device
· Simple installation work / same as existing upper sensor / no wiring work
CIP-S100
Main Function
Key Specifications
| Section | Description | |
| Wireless communication | BLE 4.1 | 2.4 GHz, PRoC_CYBLE-012011-00, sensitivity (recognition distance) adjustment, communication distance 5 ~ 15m |
| I/O | CPU | BLE Chip |
| Access sensor | Access sensor, detection distance: 1 ~ 3m from door, detection angle: 120 degrees or more | |
| Relay | NO, P, NC 3pin, Connector = Terminal Block | |
| Lights | 4-LED | Primary sensor detection, Secondary sensor detection, Door open operation |
| Connection Cable | 4-wire Cable | 1). Power 2 strands (non-polarity reversal prevention)
2). Door open signal 2 strands (non polarity reversal prevention application) 3). Cable / length: 2.5m |
| Power | Applied voltage | 12VDC/2A(9V ~ 30V), Terminal Block, Separate adapter is not provided. |
| Current Consumption | PSM(Power saving mode): TBD, Max Power Current: 600mA(Typ) | |
| Instrument | Size / Weight | Dimensions: 200 (W) x 65(D) x 43(H)mm, Weight: 90g |
| Operating environment | Temperature | Operating: -20℃ ~ 60℃ Storage: -30℃ ~ 70℃ |
| Humidity | 5% ~ 85% (non-condensing) | |
| Product composition | Standard Packing | Door Controller, Interface Cable, 2 fixing screws, Manual, Smart Key (sold separately) |